Marantz PMD325 - Manual (Page 23)

ENGLISH
19
Program play (playing tracks in the
preferred sequence)
The order in which the CD tracks are played can be rearranged
into the sequence desired. Up to 30 tracks can be
programmed.
• Program play in the time display mode
In the case of a CD-TEXT disc, first press the TIME button on
the remote control unit to set the main display to the time
display mode.
1.
During stop, press the PROGRAM button on the remote
control unit.
“Program” appears for an instant on the main display.
The PROG indicator flashes, and the program mode is
established.
2.
Press the numeric buttons on the remote control unit or
player that correspond to the track numbers (the tracks
can also be selected using the
and buttons). To
select track number 10 or above, use the numeric buttons
to select the higher digit first and then select the lower
digit.
ADVANCED OPERATIONS
Display example: When track 2 has been selected
3. Repeat step 2 to program the desired tracks in sequence.
At each step of the programming, the number of tracks
programmed and their total time appear on the main
display. Up to 30 tracks can be programmed.
4. Once all the tracks have been programmed, press the
button on the player or remote control unit or press the
PROGRAM button on the remote control unit.
The PROG indicator stops flashing and lights up instead,
and the program is entered.
5.
Press the button on the player or the button on the
remote control unit. Play now starts in the programmed
sequence.
Program play will start even when step
4 is omitted.
Program play can also be initiated using EASY JOG on
the player. (See page 30.)
TIME
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
TTL TTL TIME
RANDOM 9 7 8
PROGRAM 0 A-B CANCEL
TEXT
PROG
TEXT
TTL TTL TIME
PROG
3 REPEAT 1 2
6 5 4 AMS
RANDOM 9 7 8
PROGRAM 0 A-B CANCEL
1 2 3 4 5 6 7 8 9 0
TEXT 2 4 6 8 10
TTL TRK TTL TIME
PROG
PROGRAM 0 A-B CANCEL
PLAY/PAUSE
+
CUE STOP
JOG
-
PHONES LEVEL QUICK REPLAY
TEXT 2 4 6 8 10
TTL TTL TIME
PROG
TEXT 2
TTL TRK TTL TIME
PROG