Philips Magnavox 27MS343S - Manual (Page 12)

12
1
2
3
4
5
6
7
8
9
0
STANDBY
SMART
SOUND
SMART
PICTURE
MENU
EXIT
CALL
TV/AV
SLEEP BOOKMARK
MTS
DISPLA Y 100
MUTE
CH
CH
VOL VOL
1
2-4
PIC. SND SET TUN.
COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
BLUE BACK 50
50
50
50
0
ON
PIC. SND SET TUN.
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
AUTO PROGRAM 2
TV
ADD
UP
]
TV 25
AUTO
MONO
PIC. SND SET TUN.
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
AUTO PROGRAM
2
TV
ADD
UP
]
TUN. AUTO PROGRAM
TV 45
AUTO PROGRAM
STOP
}
Y ou can set your TV to receive local TV channels
(from an Antenna) or Cable TV channels (when
you have Cable TV service). Then, use AUTO PRO-
GRAM to set up the channels that are available for
you.This makes it easy for you to select only the
available TV stations when you press CH+ or CH-.
Before you start AUTO PROGRAM, connect the
Antenna or Cable TV signal as detailed on pages five-
six; set TV/CABLE as described on page 11.
1 Press MENU to see the menu.
2 Press VOL + or VOL - repeatedly to
highlight TUN. (tuner).
3 Press CH+ or CH- to highlight
AUTO PROGRAM.
4 Press VOL + to start programming TV
channels. Press VOL- if you need to stop
channel programming during the
process.
When channel setup is complete,TUN-
ING FINISHED will appear briefly.Then
the TV will go to its lowest channel.
Auto Program (Setting TV Channels)
Press CH + and CH- to see
which channels are in the
TV’s memory.You can still
select non-memorized chan-
nels using the Number but-
tons on the remote control.
To delete unwanted channels
from the TV’s memory or to
add more channels, see
ADD/ERASE on page 14.
You cannot select TUN. if
the TV is on the VIDEO 1 or
VIDEO 2 channel. Press
TV/AV/EXIT repeatedly to
get to the TV channels.
Helpful Hints