Philips Magnavox 27MS343S - Manual (Page 6)

6
A combination antenna receives normal
broadcast channels (VHF 2-13 and UHF
14-69).Your connection is easy since you will
connect the antenna to the 75
OHM ANTENNA
INPUT jack on the rear of the TV.
1 If your antenna has a round cable
(75 ohm) on the end, then you're ready
to connect it to the TV. Go to step 2.
If your antenna has flat twin-lead
wire (300 ohm), you first need to attach
the antenna wires to the screws on a
300 to 75 ohm adapter (not supplied
with TV).
2 Push the round end of the adapter or
antenna cable onto the 75 OHM
ANTENNA INPUT jack on the rear of
the TV. If the round end of the antenna
cable is threaded, screw it down tight.
3 Plug the TV’s power cord into a
power outlet and turn on the TV.
Set TV/CABLE to TV as detailed on page
11.
Refer to AUTO PROGRAM to set up your
available TV channels. Details are on page
12.
Basic Antenna Connection
75 OHM ANTENNA INPUT OUTPUT IN 2
L
R
VIDEO
AUDIO R
L(MONO)
75 OHM
ANTENNA
INPUT
75 OHM ANTENNA INPUT OUTPUT IN 2
L
R
VIDEO
AUDIO R
L(MONO)
If you have separate UHF and VHF antennas, you need an
optional combiner to connect the antennas to the TV.
UHF/VHF
Combiner
75-300 Ohm Adapter
VHF Antenna
VHF Antenna
UHF Antenna
Rear of TV
OR