Maytag 860S - Manual (Page 15)

15
Language, Child lock, Buzzer
volume, Water hardness,
Temperature unit, Machine
information, Reset machine to the
original settings
You will probably only need to adjust these
settings when the machine is new.
To get to the Specialsettings
1. Turn the machine off with the main power
button.
2. Press and hold the Temperature button
and at the same time turn the machine on
with the main power button .
3. Release Temperatur button and you will
now be in special settings.
4. Press the Drying button until the desired
setting appears in the display.
Language
Using the Temperature button, select the
language you wish to use. Continue using
the Drying button and adjust other settings if
required, or press Start/stop if you want to
start the machine.
Child lock
Select ‘On’ with the Temperature button to
activate the child lock. Continue with the
Drying button to make further adjustments
or press Start/Stop.
To temporarily deactivate the child lock
when starting the machine, press the Drying
and the Temperature buttons
simultaneously.
The child lock comes back on automatically
after three minutes.
Buzzer volume
If you wish, the machine will emit a buzzer
signal to let you know when it is finished.
Specialsettings
Adjust the volume with the Temperature
button. Select from 1, 2, 3, 4, 5, 6, 7, 8, 9 and
0 = Off. Continue with the Drying button to
make further adjustments or press Start/
Stop.
Water hardness (machine with
water softener)
Phone your local water
board to check the
water hardness in your
area. The machine is
set for low water hard-
ness on delivery.
Set the desired hard-
ness with the
Temperatur button.
Select from 1, 2, 3, 4, 5,
6, 7, 8, 9 and 0 =
without water softener
as well as machines
with water softener and low hardness.
Continue with the Drying button to make
further adjustments or press Start/Stop.
Temperature unit
Using the Temperature button, choose if the
temperature is to be displayed in °C or °F.
Continue with the Drying button to make
further adjustments or press Start/Stop.
Machine information
By pressing the Temperature button, you can see
how much water the machine used the last time it
was operated. You can also see how many times it
has been used since it was new.
To exit Special settings
Press the Drying button or Start/Stop.
Resetting the machine
Switch off machine at the main switch. Hold in the
Programme button while pressing the main switch
The machine will reset itself to the original settings
(with the exception of water hardness and language).
No. ˚dH ˚fH
0 0-5 0-9
1 6-8 9-14
2 9-11 15-20
3 12-14 21-25
4 15-19 26-34
5 20-24 35-43
6 25-29 44-52
7 30-39 53-70
8 40-49 71-88
9 50+ 89+