Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 33)

New ALE Features
If the received call includes a message, an exclamation
mark precedes the station name, and the name is
followed by a colon and the message. FROM
!ABC:PACK
MOTOROLA
CALL LQA MON
If the calling station name and message are too long and
do not fit in the display, press
<-> (F3) to enter the View
mode, where you can scroll right and left to display the
whole message.
FROM
!ABC:PACK
MOTOROLA
CALL LQA <--> MONs
➤ To display LQA for the received call:
Press LQA (F2). You will see the channel in use, and its LQA score.
Link State
After the radio successfully receives or transmits a call, it is in the link state.
If the call was received from another radio, the display
includes the word FROM in the first line, as well as the
name of the station which initiated the call (if a message has
been received, it is also displayed).
FROM
ABC
MOTOROLA
CALL LQA MON
If the call was initiated by your radio, the display includes
the word LINK in the first line, as well as the destination
address. LINK
1234
MOTOROLA
CALL PAGE MONs
Link State Options
While in the link state, you can operate the functions described below using the
function keys.
To scroll to the desired screen, press
MORE .
Note
The change of link options is temporary. When you exit the link
state for the current call, all the changed parameters will be lost.
<-> (F1) activates the View mode, where you can view the entire station
address (when over 11 characters), as well as received messages, if
any (when over 11 characters).
PAGE (F2) enables you to select a message to be sent to the station you are
linked to. After a message is selected, you can edit it.
Note
The PAGE function is not available when receiving an AllCall.
_________________________________________________________________________________________________
19