English, Dvd setup, Audio setting – Marantz DV6500 User Manual

Page 27: Speaker setting, Speaker size, Front(l/r), center, surround(l/r) (default: large), Sub woofer (default: on), Delay time, Down sampling (default : on), When playing disc with copyright protection

Advertising

– 27 –

English

SPEAKER SIZE

• Press the Cursor buttons (

K or

L) to select the speaker to set.

• Press Enter until the desired

speaker size appears.

FRONT(L/R), CENTER, SURROUND(L/R)

(Default: LARGE)

LARGE: Select this when the connected speaker is capable

of playing back sounds of 100Hz or less.

SMALL: Select this when the connected speaker is not

capable of playing back sounds of 100Hz or less.

OFF:

Select this when it is not connected. (It cannot be
set OFF on the FRONT speaker.)

SUB WOOFER (Default: ON)

ON:

Select this when SUB WOOFER is connected.

OFF:

Select this when it is not connected.

NOTES:

• “OFF” is not available for SUB WOOFER when

“SMALL” is selected for FRONT(L/R).

• “SMALL” is not available for FRONT(L/R) when “OFF”

is selected for SUB WOOFER.

• When in playback of DVD audio, the sound may not

come out as set due to restrictions in the disc or the
player.

• During DVD-Audio playback, the Low Pass Filter

(which filters out the sound with the sound wave fre-
quency over 100Hz) of the SUB WOOFER will be
turned off with the following speaker setting. Otherwise,
the Low Pass Filter will be turned on.

FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE

DELAY TIME

To enjoy 5.1-channel surround sound, the distance between
the listening position and all speakers (excluding the Sub
woofers) should ideally be set at a uniform distance on a cir-
cle. If the speakers cannot be set at this manner, the ideal lis-
tening position can be virtually created
with the delay time setting.

Use the Cursor buttons (

K or L) to

select the setting item, then press the
ENTER button.

• Press the Cursor buttons (

K or

L) to select the speaker to set,

then press the ENTER button.

DISTANCE (Default : FEET)

METERS(when the ENTER button is pressed):

The unit of distance is set to meters (“m”).

FEET(when the ENTER button is pressed):

The unit of distance is

set to feet (“ft”).

FRONT(L/R), CENTER, SUR-
ROUND(L/R)

(Default : 10ft)

FRONT(L/R):
The distance can be set within the
range of 0 to 60 feet.
CENTER, SURROUND:
These are depends on the setting
value of FRONT(L/R).

NOTES:

• It is not possible to adjust this item if CENTER and

SURROUND have been set to OFF in the SPEAKER
SIZE setting.

• When DEFAULT is selected and the ENTER button is

pressed, all the items are restored to their factory
default settings.

Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD play-
er.

Press the SETUP button in stop mode.
Press the Cursor buttons (

s or B ) to select

CUSTOM, then press the ENTER button.

• CUSTOM mode will appear.

Press the Cursor buttons (

B ) to select AUDIO, then

the ENTER button to confirm.
Press the Cursor buttons (

L ) button to select the

below items, then press the
ENTER button.

DRC (Dynamic Range Control)
(Default : ON)

• To compress the range of sound

volume.

• DRC function is available only on

the discs that are recorded in the
Dolby Digital format.

DOWN SAMPLING (Default : ON)

• Set to ON when outputting in

48kHz.

• This function is available only on

digital outputting of a disc record-
ed in 96 kHz.

When playing disc with copyright protection

• The sound will be down sampled at 48 kHz, even if you

set to OFF.

DOLBY DIGITAL (Default : ON)

Set to ON when the player is con-
nected to Dolby Digital decoder.
ON:

Output by Dolby Digital.

OFF:

Convert the Dolby Digital
to PCM.

DTS (Default : PCM)

DTS:

Output by DTS sound
Set to DTS when the unit is
connected to DTS decoder.

PCM: Convert the DTS sound

to PCM.

Press the SETUP button to exit.

QUICK

DVD SETUP

AUDIO