Maytag Epic z W10112937A User Manual

Page 21

Advertising
background image

21

2. Remove the 4 screws that attach to the inner door hinge and move the hinge to the other

side. Reinstall the 4 screws.

3. Reinstall plug strips on opposite side of the inner door.
4. Check for fingerprints on the glass. Clean glass if necessary.
5. Place the inner door assembly inside the outer door assembly. To fit correctly, the inner

door assembly edge fits completely inside the outer door assembly edge.

6. Reassemble the inner and outer door assemblies with the 6 screws.

Reverse the strike
1.
Use a small flat-blade screwdriver to remove plug strip from the dryer door opening. Slide

the head of the screwdriver under the plugs, being certain not to scratch the dryer surface.
Lift up.

2. Remove the strike

3. Insert strike on the opposite side.

Reinstall the door
1.
Reattach door to dryer front panel with the 4 screws.

2. Check for fingerprints on the glass. Clean glass if necessary.
3. Close door and check that it latches securely.

A. Door hinge

A

A. Plug strip (cannot be seen from this angle)

B. Door strike

A. Dryer front panel

B. Door assembly

B

A

A

B

Advertising