Mark Levinson N 51 - Manual (Page 30)

2-8
Basic Operation Mark Levinson
appropriate video format—CVSB (Composite), S-Video or RGB. Each
mini-jack requires a mini-plug (Tip/Sleeve) connection. See your Mark
Levinson dealer for more information.
9. HDMI
connector
H igh Definition Multimedia Interface multi-pin connector for passing
standard and high definition digital video signals and both compressed
and uncompressed digital audio streams. Uses HDCP (High-bandwidth
D
igital Content Protection).
10. monitor
connector
Provides composite output, without on-screen display, to a video monitor.
11. comm Reserved for future applications.
12. RS-232 ports 6-pin modular RJ-11 jacks provide serial control. Two connectors labeled
Port 1 (reserved for internal use) and Port 2 (used for RS-232 control) are
provided.
13. trigger input
connector
One 1/8-inch (3.5mm) mini-jack labeled trigger input is available to
receive trigger signals. The mini-jack requires a mini-plug (Tip/Sleeve)
connection.
14. IR input
connector
Accepts 12V infrared input signals with no more than 100mA of current
from standard infrared distribution equipment such as IR repeaters. One
1/8-inch (3.5mm) mini-jack labeled IR input is available. The mini-jack
requires a mini-plug (Tip/Sleeve) connection in which the tip of the mini-
plug has positive polarity.
15. region code
indicator
Indicates the Nº51 region code, which differs depending on the region of
purchase. All DVD-Vs are marked with a region code, which is often
located on the disc packaging. The Nº51 is compatible with discs marked
with the same region code as the region code on the back of the player.
The Nº51 is not compatible with discs marked with other region codes.