Mark Levinson N 51 - Manual (Page 61)

3-25
Nº51 Media Player Setup Menu
Reset Display Profile (Setup : Video : Edit Display Profile : HDMI Out :
Reset Display Profile)
Reset Display Profile resets the parameters of the display profile
associated with the HDMI connector to the original settings.
To reset the display profile:
1. Use the remote control up or down button to select “Reset
Display Profile” and press enter.
2. When prompted to confirm the selection, press enter.
Edit Display Profile:
Comp. Out Prog. Scan
Component Output Progressive Scan parameters control the video
format when a PS (480/576p) source is present, the Nº51 Media
Player is using the Component video output connectors, and the
video output switch (on rear panel) is set to ED video.
Display Aspect Ratio (Setup : Video : Edit Display Profile : Comp. Out
Prog. Scan : Display Aspect Ratio)
See Display Aspect Ratio on page 3-22.
Zoom Ratio (Setup : Video : Edit Display Profile : Comp. Out Prog. Scan :
Zoom Ratio)
See Zoom Ratio on page 3-23.
Reset Display Profile (Setup : Video : Edit Display Profile : Comp. Out
Prog. Scan : Reset Display Profile)
Reset Display Profile resets the parameters of the display profile
associated with the Component video output connectors to the
original settings.
Parameter Default Possible Settings
Display Aspect Ratio 4:3 16:9, 4:3, 4:3 P&S
Zoom Ratio Normal Normal, Widescreen, Fill, Fill + Wide
Reset Display Profile Yes Yes, No
Setup Video Edit Display Profile
HDMI Out
Comp. Out Prog. Scan
Analog Out Stand. Def.
Setup Video
Select Source Profile
Edit Source Profile
Edit Display Profile
Default TV Standard
Test Images
Setup Video...Comp. Out Prog Scan
Display Aspect Ratio
4:3
Zoom Ratio Normal
Reset Display Profile