Mark Levinson N 51 - Manual (Page 41)

3-5
Nº51 Media Player Setup Menu
Outputs: S/PDIF Audio
Preferences
Use the S/PDIF Audio Preferences option to set the audio behavior
of a digital audio source when the Nº51 Media Player is using a
digital audio output connector (AES/EBU, S/PDIF or EIAJ). These
parameters have no effect when using any of the analog output
connectors.
Dolby Digital (Setup : Audio : Outputs : S/PDIF Audio Preferences : Dolby
Digital)
Use the Dolby Digital option to set the output behavior of a Dolby
Digital-encoded source when the media player is using a digital audio
output connector.
To select an audio format:
Using the remote control up or down button, highlight the desired
setting and press enter.
• Select Encoded if the associated component is compatible with
Dolby Digital sources. The Nº51 Media Player will pass Dolby
Digital-encoded signals directly to the associated component.
• Select PCM if the associated component is not compatible with
Dolby Digital sources. The Nº51 Media Player will downmix Dolby
Digital-encoded signals to 2-channel PCM before passing them to
the associated component.
DTS (Setup : Audio : Outputs : S/PDIF Audio Preferences : DTS)
Use DTS option to set the behavior of DTS source when the Nº51
Media Player is using a digital audio output connector.
To select an audio format:
Using the remote control up or down button, highlight the desired
setting and press enter.
• Select Encoded if the associated component is compatible with
DTS sources. The Nº51 Media Player will pass DTS signals directly
to the associated component.