Motorola PRIVACY PLUS B7 - Manual (Page 28)

MAEPF-22628-O
AH,AB,Z,AC
Programming the Radio’s Lists (cont.)
6. Press the “select” key (normally side button 1)
to enter the number-edit mode. The display
shows the current member’s radio ID number.
You can now change numbers, using any of the
numeric (0 – 9) keys. The blinking cursor
indicates the position of the next number to be
added.
Note: When programming, the left arrow key
(
) acts as a backspace key. Pressing this key
erases the previous digit, and the cursor moves
to the left. When the last digit on the display
has been erased, another press of this key or
the right arrow key ( ) causes you to leave the
number-edit mode without making any changes,
and reenter the procedure at step 5.
7. To change the radio ID number, use the left
arrow key to erase the existing ID number’s
digits, then enter the new digits. The display
shows the digits as they are being entered; the
cursor flashes to indicate the location of the
next digit to be entered. When the maximum
number of digits (6) has been entered, the
cursor will disappear. If you try to add any more
digits, you will hear an invalid (bad) keypress
alert tone.
8. When you have finished changing the ID
number, press the select key again; the change
is saved in the radio’s memory and you are
returned to step 5. The display will again
alternate between showing the member’s name
and radio ID number; you can change additional
numbers from this point.
9. When you have finished making changes, press
the HOME key to exit the program mode. The
radio will return to the home display.
26
26 General Radio Features Operation
(cont.)
HOME