Motorola PRIVACY PLUS B7 - Manual (Page 65)

63 Conventional Radio Features Operation
(cont.)
MAEPF-22627-A
H, I 63
Conventional Telephone Operation (cont.)
Making a Telephone Call Using the Keypad
(Model B7 Only)
1. To make a telephone call using the keypad, press
the phone button (normally the orange top
button). The display shows the last telephone
number dialed. The new telephone number can
now be entered from the keypad, using any of
the numeric (0 – 9) keys, as well as the “*” and
“#” keys. You can also enter a pause in the
telephone number by first pressing the “*” key,
then the “#” key. The pause will be shown on the
display as a “P.”
Note: The last number dialed cannot be changed
from the keypad.
2. Enter the telephone number. The display shows
the numbers as they are being entered and the
cursor flashes to indicate the location of the next
number to be entered. When the maximum
number of digits have been entered, the cursor
will disappear.
Note: Once you have started entering numbers,
the left arrow key ( ) acts as a backspace key.
Pressing this key erases the last digit entered,
and moves the cursor to the left. When the last
d i g i t o n t h e d i s p l a y h a s b e e n e r a s e d , a n
additional press of this key will cause the last
member of the preprogrammed telephone list to
be displayed; pressing the right arrow key will
show the first member of the list.
HOME
2 A B C 1 3
D E F
6 MNO 5 JKL
8 TUV 9 W X Y
0
4 G H I
7 P R S