Multi-Tech Systems E1 - Manual (Page 267)

MultiVOIP User Guide Operation & Maintenance
267
Logs Screen Details: Field Definitions (cont’d)
Field Name Values Description
Call Details
Voice coder G.723, G.729,
G.711, etc. The voice coder being used on
this call.
Disconnect
Reason Values are
"Normal" and
"Local"
disconnection. Indicates whether the call was
disconnected simply because the
desired conversation was done
or some other irregular cause
occasioned disconnection (e.g., a
technical error or failure).
DTMF Capability inband,
out of band
Expressions
differ slightly
for different
Call Signaling
protocols
(H.323, SIP, or
SPP).
Indicates whether the DTMF
dialing digits are carried
"Inband" or "Out of Band." The
corresponding field values differ
for the 3 different voip protocols.
For H.323, this field can display
"Out of Band" or "Inband". For
SIP it can display either "Out of
Band RFC2833" or "Out of Band
SIP INFO" to indicate the out-of-
band condition or "Inband" to
indicate the in-band condition.
For SPP it can display "Out of
Band RFC2833" or "Inband".
Outbound Digits
Received 0-9, #, * The digits, sent by MultiVOIP to
PBX/telco, that were
acknowledged as having been
received by the remote voip
gateway.
Outbound Digits
Sent 0-9, #, * The digits transmitted by the
MultiVOIP to the PBX/telco for
this call.