Multi-Tech Systems E1 - Manual (Page 368)

Index MultiVOIP User Guide
368
E1.............................................. 224
T1.............................................. 181
Alternate Proxy 1 and 2 (SIP Call
Signaling) fields........................ 115
Alternate Registrar 1 and 2 (SPP Call
Signaling) fields........................ 119
Alternate Routing
PSTN failover feature, and ....... 183
Alternate Routing field definitions
E1.............................................. 226
T1.............................................. 183
Alternate Routing field definitions
(E1)
Alternate IP Address................. 226
Round Trip Delay ..................... 226
Alternate Routing field definitions
(T1)
Alternate IP Address................. 183
Round Trip Delay ..................... 183
Annex E field................................ 113
Answer Delay (Enable)
E1.............................................. 102
T1................................................ 94
Answer Delay Timer
E1.............................................. 102
T1................................................ 94
answer supervision criteria, FXS (E1)
.................................................. 103
answer supervision criteria, FXS (T1)
.................................................... 95
Answer Tones (FXS answer
supervision) field ................ 95, 103
Append SIP Proxy Domain Name in
User ID (proxy server).............. 115
Auto Disconnect field group........... 88
AutoCall.......................................... 83
AutoCall (Voice/Fax Params) and
Pass Through Enable (FXS Loop
Start) ........................................... 83
AutoCall/Offhook Alert field.... 83, 84
Automatic Disconnection field ....... 88
Available Tones (FXS answer
supervision, E1) field................ 103
Available Tones (FXS answer
supervision, T1) field.................. 95
bandwidth, coder............................. 81
battery caution ................................ 31
baud rate, default (MultiVOIP
software connection): ................ 164
baud rate, fax................................... 79
baud rate, setting ........................... 164
Behind Proxy/NAT device............ 120
Bipolar Violation (E1 stats) field .. 286
Bipolar Violation (T1 stats) field .. 283
Blue Alarm (E1 stats) field ........... 284
Blue Alarm (T1 stats) field ........... 281
Boot LED
on MVP-2410/3010..................... 37
Boot Version
System Info ....................... 166, 254
booting time
E1 ................................................ 24
T1 ................................................ 16
box contents
verifying...................................... 32
BRI connector pinout .................... 356
BRI interface types
ST and U ................................... 357
built-in modem
setup in Regional Parameters
screen .............................. 59, 125
busy & no-response (E1)
forwarding, dual conditions ...... 229
busy & no-response (T1)
forwarding, dual conditions ...... 187
busy tone, custom.......................... 131
busy-tones ..................................... 130
Bytes Received (call progress) field
.................................................. 259
Bytes Received (RADIUS
Attributes) field ......................162
Bytes Received (SMTP logs) field 137
Bytes received (statistics, logs) field
.................................................. 268
Bytes Sent (call progress) field ..... 259
Bytes Sent (RADIUS Attributes) field
.................................................. 162
Bytes Sent (SMTP logs) field ....... 137
Bytes sent (statistics, logs) field.... 268
cable length, maximum span
E1 .............................................. 100
T1 ................................................ 92
cabling problem, fixing ................... 64
cabling procedure
MVP2410.................................... 36