Multi-Tech Systems E1 - Manual (Page 298)

Operation and Maintenance MultiVOIP User Guide
298
MultiVOIP Program Menu (cont’d)
Menu Selection Description
Download CAS Protocol The CAS protocol code allows the VOIP to
interact properly with the PBX or central-
office switch that it serves. The need to
download CAS protocols arises for only a
small minority of VOIP users, and only
when PBX/switch is found to be
incompatible with standard protocols.
Download Factory Defaults Select this to return the configuration
parameters to the original factory
values.
Download Firmware Select this to download new versions
of firmware as enhancements become
available.
Download User Defaults To be used after a full set of parameter
values, values specified by the user,
have been saved (using Save Setup).
This command loads the saved user
defaults into the MultiVOIP.
Set Password Select this to create a password for
access to the MultiVOIP software
programs (Program group commands,
Windows GUI, web browser GUI, &
FTP server). Only the FTP Server
function requires a password for access.
The FTP Server function also requires
that a username be established along
with the password.
Uninstall Select this to uninstall the MultiVOIP
software (most, but not all components
are removed from computer when this
command is invoked).
Upgrade Software Loads firmware (including H.323
stack) and settings from the controller
PC to the MultiVOIP unit. User can
choose whether to load Factory
Default Settings or Current
Configuration settings.