Microsoft PRO 906EX - Manual (Page 100)

Tray Paper Settings
92
3
❖ Copying Method in Duplex
• 2 Sided Copy
• 1 Sided Copy
❖ Apply Auto Paper Select
• Yes
• No
❖ Thick Paper Setting
If the LCT (A3 / 11”×17” Tray Unit TK5000) is utilized, this function is not
available.
• On
• Off
❖ Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.
❖ Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.
❖ Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed]
in Display Time.