Microsoft PRO 906EX - Manual (Page 150)

Copier/Document Server Features
142
4
Input/Output
This section describes various items of [Input/Output] under [Copier/Document Serv-
er Features]
.
❖ SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to "5 second(s)" by default.
❖ Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an orig-
inal placed on the exposure glass.
• Face Up
• Face Down
❖ Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
• On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
• Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖ Sort/Stack Shift setting
You can specify whethere to shift the Shift Tray in sort mode or stack mode.
• On
• Off
❖ Insert Separation Sheet
You can specify the number of copy pages for inserting the Separation Sheet
from 1 to 999 pages in increments of 1 page.