Microsoft PRO 906EX - Manual (Page 171)

System
163
5
❖ Initial Print Job List
You can set the desired type of print job list that appears on the screen when
you press [Print Jobs].
• Complete List
Displays the list of print jobs stored in the machine.
• List Per User ID
Displays the list of the User ID who stored a file in the machine.
❖ Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority,
according to paper size or resolution.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses frame memory for high speed printing.
❖ Duplex
You can select to have print on both sides of each pages.
• Off
• Long Edge Bind
• Short Edge Bind
❖ Copies
You can specify the number of print sets. This setting is disabled if the num-
ber of pages to print has been specified with the printer driver or another
command.
• 1–9999
Default: 1
❖ Blank Page Print
You can select whether or not to print blank pages.
• On
• Off
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside of the printable area.
• There are only blank characters.
❖ Toner Saving
Select either to apply or not to apply Toner Saving.
• On
• Off