Marantz PD6120D - Manual (Page 38)

31
Setting RGB3 ADJ.
When the picture input from the RGB3 input terminal is
distorted, select the most appropriate setting from among
“1”, “2”, and “3”.
Example: Setting “2”
Press the PROCEED button on the remote control to
display MAIN MENU on the screen, then...
1. Use the
▲ and ▼ buttons to select “FUNCTION”,
then press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the
▲ and ▼ buttons to select “RGB3 ADJ.”.
F U N C T I O N
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE ON
1
OFF
3
ON :
:
:
:
:
SEL. ADJ. RETURN EXIT
1 :
LONG LIFE
RGB3 ADJ.
RESET
3. To select “2”...
Use the ᮤ and ᮣ buttons to select “2”.
The mode switches as follows each time the ᮤ or ᮣ
buton is pressed:
→
1
↔
2
↔
3
←
F U N C T I O N
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE ON
1
OFF
3
ON :
:
:
:
:
SEL. ADJ. RETURN EXIT
2 :
LONG LIFE
RGB3 ADJ.
RESET
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
Ⅵ When you adjust the RGB3 ADJ.
The position of the menu display will change. In such
a case, be sure to adjust the position.
Ⅵ Restoring the factory default settings
Select “RESET” under the function menu. Note that
this also restores other settings to the factory defaults.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture,
and positive/negative mode are adjusted to reduce burn-
in of the screen.
Example: Setting “PLE” to “LOCK”
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then proceed as
follows.
1. Use the
▲ and ▼ buttons to select “FUNCTION”, then
press the PROCEED button.
The “FUNCTION” screen appears.
2. Use the
▲ and ▼ buttons to select “LONG LIFE”, then
press the PROCEED button.
The “LONG LIFE” screen appears.
3. Use the
▲ and ▼ buttons to select “PLE”, then use the
ᮤ and ᮣ buttons to select “LOCK”.
The mode switch changes as follows each time the ᮤ
or ᮣ button is pressed:
AUTO
↔
LOCK
4. Once the setting is completed...
Press the EXIT button to return to the FUNCTION
menu.
To exit the main menu, press the EXIT button twice.
F U N C T I O N
OSM
OSM ADJ.
POWER MGT
GRAY LEVEL
CINEMA MODE ON
1
OFF
3
ON :
:
:
:
:
1 : RGB3 ADJ.
SEL. RETURN EXIT PROCEED OK
LONG LIFE
RESET
L O N G L I F E
PLE
ORBITER
INVERSE
OFF
OFF
LOCK :
:
:
SEL. ADJ. RETURN EXIT