Miele DA 8-2 - Manual (Page 12)

Electrical connection
Electrical connection - CDN
The extractor is supplied with a 1.10 m
power supply cable ready for connec-
tion to a 120 VAC, 60 Hz supply.
The rated load is 110 W. Fuse rating is
10 A.
Caution:
Make sure the power supply is OFF
during installation.
Important
The wires of the power cord are co-
lored as follows:
Green = ground
Black
= live
White = neutral
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection - USA
The extractor is supplied with a 4 ft
cord ready for connection to a
120 VAC, 60 Hz power supply. Connec-
tion should be made in an appropriate
junction box.
The rated load is 110 W. Fuse rating is
10 A.
Important
The wires of the power cord are color-
coded as follows:
Green/Yellow = ground
Blue
= neutral
Brown = live
As the colors of the wires in the power
supply cord of this appliance may not
correspond with the colors of the wires
in your junction box, proceed as follows:
The green and yellow wire must be con-
nected to the ground wire.
The blue wire must be connected to the
neutral wire.
The brown wire must be connected to
the hot wire.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
12