Metrologic Instruments IS3480-00 - Manual (Page 15)

11
I NSTALLATION
Notes for Low Speed USB (External with MX009)
Metrologic’s MX009 USB cable is a device that converts serial RS232 formatted
data to either USB Keyboard or USB Point-of-Sale communication protocol.
Please refer to the MX009 USB Converter Cable Programming Guide
(
MLPN 00-02574) supplied with your MX009 cable for detailed installation and
programming guidelines.
Notes for Laser Emulation
IS3480-00 Only
The IS3480-00 leaves the factory with the Laser Emulation Mode enabled. If the
Recall Defaults bar code is scanned while reconfiguring the scanner the laser
emulation mode will no longer be enabled.
Scan the following barcode to re-enable the laser emulation interface. This
feature is only supported for IS3480-00 models.
Enable Laser Emulation Mode
³ 9 9 9 9 7 9