Metrologic Instruments IS3480-00 - Manual (Page 8)

4
I NTRODUCTION
Scanner Components
Figure 1. Scanner Components
I TEM N O . D ESCRIPTION
n Utility Connector Located Under Rubber Seal
The rubber seal protecting the utility connector should
only be removed if the utility connector is to be used.
o 10-Pin RJ45, Female Socket
p Blue, White and Yellow LED Indicators
q Red Output Window (Laser Aperture)
r Pin Hole for Cable Release
s Speaker
t Three M2.5 x 0.45 Threaded Mounting Points
u Two M2.5 x 0.45 Threaded Mounting Points
v Button
Maintenance
Smudges and dirt can interfere with the proper scanning of a bar code.
Therefore, the output window will need occasional cleaning.
1. Spray glass cleaner onto a lint free, non-abrasive cleaning cloth.
2. Gently wipe the scanner window.