MITSUBISHI ELECTRIC UNISEN LT-46153 - Manual (Page 38)

38 4. TV Menus
Adjust
Picture
Mode
Brilliant For use under bright light; unavailable when the current
input is named
Game or PC. Power use exceeds
ENERGY STAR ® standards when Picture Mode is Brilliant.
Set the Picture Mode first
before changing other video
settings, as some settings are
stored independently for each
Picture Mode. Use Picture
Modes to get the best image
under different viewing condi-
tions.
Game Optimizes picture and video processing for gaming
consoles. Available only when the name of the current
input is
Game or PC.
Bright For most daytime viewing and x.v.Color sources
Natural For most nighttime viewing and x.v.Color sources
Special/
ADV Advanced Picture Modes. Contact your professional installer for setup or see “Advanced Picture”
page 42.
Contrast
Low contrast shows a variety of shades in darker images •
In most home lighting situations, medium contrast looks best. •
High contrast shows darker images more uniformly black and •
makes colors appear more vibrant. High contrast is good for
brightly lit environments.
Adjusts the white-to-black level
Settings are stored indepen-
dently for each Picture Mode.
Brightness Adjusts overall picture brightness. Settings are stored independently for each Picture Mode.
Color Adjusts overall color intensity from monochrome to fully saturated.
Tint Adjusts the red-to-green ratio.
Sharpness Adjusts picture detail and clarity.
Color
Temp
High Gives white images a cool cast. May provide the most
realistic picture under bright lighting. Adjusts the white balance.
Settings are stored indepen-
dently for each Picture Mode.
Low Gives white images a warm cast. Natural/Color Temp
at the low setting displays video at approximately the
6500K industry standard for NTSC pictures.
Video
Noise
High,
Medium,
Low, Off Reduces minor noise (graininess) in the picture. Saved by input. This adjustment is not
available if the current input is named PC or Game.
Use
High with poor-quality signals. Use Medium for moderate noise reduction. Use Low
with good-quality signals. Use Off to leave the picture unaltered.
SharpEdge
On, Off SharpEdge™ adds special edge enhancements to make the image appear sharper.
Saved by input.
DeepField
Imager
On, Off 153 Series. DeepField™ Imager dynamically enhances black levels in portions of the
screen to provide strong contrast with detail over mixed screen content.
Demo For comparison, displays a split picture to show On (right side) and Off (left side).
Backlight Adjusts peak brightness of the backlight. Press ENTER to turn off the backlight.
Picture
Assign names to TV inputs before making
video adjustments (
New Device Found or
Inputs > Name menu). Adjustments will be
reset to the defaults if you name or rename
inputs afterwards. To make picture adjust-
ments:
From the • Adjust > Picture menu:
Press 1. to highlight an option.
Press 2. to adjust.
While watching TV: • Press the MORE key and then
8 (VIDEO) in the on-screen menu. Press to
select the video option you want to change. Press
to change settings.
Note: Changing Picture settings from the default
values used in Home mode may cause energy
use to exceed ENERGY STAR ® efficiency stan-
dards.