MITSUBISHI ELECTRIC UNISEN LT-46153 - Manual (Page 9)

1. Basic Setup and Operation 9
Before You Begin
Review the important safety, installation, and oper- 1.
ating information at the beginning of this book.
Choose a location for your TV.
2.
• See the stand-installation or wall-mounting
requirements on the opposite page.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV.
• Avoid locations where light may reflect off the
screen.
Install the batteries in the remote control. 3.
Plug the TV into an AC power outlet. 4.
TV power connection
Welcome Screen Energy Options
Mitsubishi recommends the • Home setting, which
meets ENERGY STAR® efficiency standards.
Home Fast Power On • allows the TV to power up
quickly. With this setting the small current the TV
draws while powered off exceeds ENERGY STAR
standards for a powered-down device.
The • Retail setting looks best under bright light-
ing. This mode increases the TV’s power con-
sumption beyond ENERGY STAR standards.
This table compares Welcome screen energy modes.
Home
Home Fast
Power On
Retail
Picture Mode Bright Bright Brilliant
Backlight
Level Reduced
Brightness Reduced
Brightness Full
Brightness
Time to
Power On Normal Fast Normal
First-Time Power-On
Confirm that the remote 1.
control is in TV mode.
Press the side button •
once to light the mode
indicator and confirm
that
TV mode is active.
To change, press the •
side button additional
times to activate
TV
mode.
GUIDE MENU INFO BACK
TV
Aim the remote control 2.
at the TV and press the
POWER key
. Wait for the
Welcome screen.
GUIDE MENU INFO BACK
Press
3.
if you wish to
change the menu language
to
Español.
Press 4. to move to the
energy-mode selections.
See the information box for
details.
Press 5. to highlight EXIT .
Press ENTER to clear the
menu.