Muratec QUADACCESS MFX-2590 - Manual (Page 146)

Error Messages 4-9
1
2
3
4
T
roubleshooting
Message on the display Description / Solution
Memory overflow. Cannot sort print.
To print one set only, press [Print].
To cancel, press [Cancel]. While preparing to sort the print job, the machine run out
of memory.
To print one set, press [Print]. To cancel the print job, press
[Cancel].
Cassette 2 setting is not available.
To auto select the casette and print,
press [Auto Select]. To cancel, press
[Cancel]. The cassette specified on the application software or printer
driver has not been installed into the machine.
To select another cassette automatically, press [Auto
Select]. To cancel the print job, press [Cancel].
Use bypass tray to print on the
specified paper.
Specified paper:
Set paper in bypass, press [Bypass
tray] or, change the bypass tray paper
size. To cancel, press [Cancel]. The paper specified on the application software or printer
driver is not loaded into the cassette.
To print the image on paper set in bypass tray, press [Bypass
tray]. To cancel the print job, press [Cancel].
Printing on non-plain paper using
the bypass.
Set paper in bypass, press [Bypass
tray]. To cancel, press [Cancel]. The paper specified on the application software or printer
driver is not loaded into the cassette.
To print the image, load the paper in bypass tray and press
[Bypass tray]. To cancel the print job, press [Cancel].
Unable to use selected paper for
duplexing. To print on a single side,
press [Print on 1-side]. To cancel,
press [Cancel]. The paper size specified on the application software or
printer driver is not available for duplex printing.
To print the data on single side, press [Print on 1-side]. To
cancel the print job, press [Cancel].
Can only perform duplex printing on
plain paper. To print on a single side,
press [Print on 1-side]. To cancel,
press [Cancel]. The paper media type you specified on the application
software or printer driver is not available for duplex
printing. To print on single side, press [Print on 1-side]. To
cancel the print job, press [Cancel].
The paper specified on the
application software or printer driver
is not available for shifting.
To print without shifting, press
[Print].
To cancel the print job, press [Cancel]. The paper size you specified on the application software or
printer driver is not available for shifting. To print without
shifting, press [Print]. To cancel the print job, press [Cancel].
The paper specified on the
application software or printer driver
is not available for shifting.
To print without shift sort, press
[Print].
To cancel the print job, press [Cancel]. The paper size you specified on the application software
or printer driver is not available for shift sorting. To print
without shift sorting, press [Print]. To cancel the print job,
press [Cancel].
The specified paper is not loaded.
Specified paper:
Set paper in the bypass tray or,
change the bypass tray paper size. To
cancel, press [Cancel]. The paper you specified on the application software or
printer driver is not loaded in the bypass tray.
Set the specified paper in the bypass tray, or set the paper
size in the tray. To cancel the print job, press [Cancel].
The specified paper is not loaded.
Specified paper:
Load the specified paper. To cancel,
press [Cancel]. The paper you specified on the application software or
printer driver is not loaded in the cassette.
Set the specified paper in the cassette. To cancel the print
job, press [Cancel].
The specified paper is not loaded.
Specified paper in Cassette
1(Cassette2, or bypass tray).
Load the specified paper. To cancel,
press [Cancel]." The paper you specified on the application software or
printer driver is not loaded.
To print the job, load the paper into cassette or bypass tray
you specified. To cancel the print job, press [Cancel].