Logging out, Logging out -42, Logging out manually – Muratec QUADACCESS MFX-2590 User Manual
Page 49
1-42 Logging In / Logging Out
Enter the password, and press [Enter].
3
If a password is not set, press [Enter] without entering a password.
•
The message “Failed to login.” is displayed if the login fails.
•
Note
Depending on the user authentication settings, you can register a new user ID in step 2.
•
For details on machine policy settings, refer to Chapter 3, “
•
Setting Security” in the
OfficeBridge Guide.
Logging Out
There are two methods for logging out after performing a user login; manual forced
logging out and logging out automatically after the logout time elapses.
Note
For details on setting the automatic logout time, see “
Setting the Automatic Logout Time
”.
Logging Out Manually
Press <Login> after performing a user login.
1
Press [Yes].
2
If you press [No], you will not be logged out.