Muratec QUADACCESS MFX-2590 - Manual (Page 57)

2-8 Setting Security Codes
Editing / Deleting the Protect Passcode „
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Protect Passcode].
5
Enter the current protect passcode using the numeric keys, and press [Enter].
6
Enter the new passcode using the numeric keys, and press [Enter].
7
To delete the protect passcode, enter “0000” using the numeric keys, and press [Enter].