Maytag ELECTRIC WATER HEATER HR630DJLS - Manual (Page 8)

8
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE
IN 2 GALLON (PART NUMBER
66001013) AND 5 GALLON (PART
NUMBER 66001014) CAPACITY
Accessories and Tools Needed
Accessories
To simplify the installation Maytag has available the
installation parts shown below. You may or may not
need all of these accessories depending on your type of
installation. Call Maytag Customer Service at
1-800-788-8899 for an authorized installer.
Tools
You may or may not need all of these tools, depending
on your type of installation. These tools can be
purchased at your local Maytag store.
ROLL OF TEFLON TAPE
(Use only on water connections)
GARDEN HOSE
6 FOOT TAPE
PIPE DOPE
(SQUEEZE TUBE)
DRILL
PIPE
WRENCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
SOLDER
FLUX
TUBING
CUTTER
PROPANE TORCH
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
• Pipe Wrenches (2) 14”
• Screwdriver
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe dope or Teflon Tape
SLOT-HEAD SCREW DRIVER
PHILLIPS SCREWDRIVER
3/4” WIRE BRUSH
1/2” WIRE BRUSH
HACKSAW
DRAIN PANS AVAILABLE IN 22” DIAMETER
(PART NUMBER 66001011) FOR WATER
HEATERS HAVING A DIAMETER 20” OR
LESS, 24” DIAMETER (PART NUMBER
66001105) FOR WATER HEATERS HAVING A
DIAMETER 22” OR LESS AND AVAILABLE IN
28” DIAMETER (PART NUMBER 66001012)
FOR WATER HEATERS HAVING A DIAMETER
26.25” OR LESS