User preferences, Default parameters, User preferences -3 – Motorola LS4208 User Manual

Page 47: Default parameters -3

Advertising
background image

User Preferences

4 - 3

User Preferences

Default Parameters

The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar
code below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom
default.

Restore Defaults - Resets all default parameters as follows:

If custom default values were configured (see Write to Custom Defaults), the custom default values are
set for all parameters each time the Restore Defaults bar code below is scanned.

If no custom default values were configured, the factory default values are set for all parameters each time
the Restore Defaults bar code below is scanned. (For factory default values, see

Table A-1 on page A-1.)

Set Factory Defaults - Scan the Set Factory Defaults bar code below to eliminate all custom default values
and set the scanner to factory default values. (For factory default values, see

Table A-1 on page A-1.)

Write to Custom Defaults - Custom default parameters can be configured to set unique default values for all
parameters. After changing all parameters to the desired default values, scan the Write to Custom Defaults
bar code below to configure custom defaults.

*

Restore Defaults

Set Factory Defaults

Write to Custom Defaults

Advertising