Motorola DTR510 - Manual (Page 42)

April 27, 2005 6881097C81-O
3-4 Advanced Radio Operations: Accessing the Advanced Menu
Remote Monitoring (initiated by DTR610 Models Only)
NOTE: Manager Mode must be enabled in order to use this feature. Refer to page 4-8.
Remote Monitoring allows you to monitor a selected radio either for training purposes or if the target
radio user is unable to press the PTT button. DTR410 radios do not support this feature.
1. From the Advance menu, scroll to highlight Remote Monitor and press under Select.
The Remote Monitor screen appears.
2. Scroll to highlight a radio from the list to monitor and press under Select. The screen
changes to show the radio’s status.
Remote Time (initiated by DTR610 Models Only)
Remote Time synchronizes the date and time to all other radios on your channel. Any receiving radio
must have the transmitting radio User ID in their contact list to accept the time/date update. DTR410
radios do not support this feature.
NOTE: Radios must be turned on and within range to receive this broadcast message. The
transmitting radio does not receive a confirmation for any failures.
1. From the Advance menu, scroll to highlight Remote Time and press under Select. The
screen displays a confirmation to start remote time.
2. Press under Yes.
Select
Joe Smith
Jones
Back
Remote Monitor
Yes
Start Remote
Time?
No