Motorola DTR510 - Manual (Page 56)

April 27, 2005 6881097C81-O
5-4 Cloning Mode: Cloning by Sending a Contact (not supported by DTR410)
8. Scroll to the contact to receive the new contact.
9. Press under Select to select the contact.
10. Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
over-the-cloning fails, the radio displays the failed member so the user can attempt cloning again.
Add:Security
Change
Send Contact
To:Joe Smith
Prgm
Press Go To
Go Back
Add:Security
To:Joe Smith
Over The Air