Motorola DTR510 - Manual (Page 47)

6881097C81-O April 27, 2005
Radio Programming: Adding Contacts (DTR510 / DTR610 only) 4-5
Programming a Unit ID (Private Calls Only)
The unit ID of a private contact can be read over the air or entered using the mini keyboard.
1. Scroll to select ID and press under Read. The ID screen appears.
2. Use the mini keyboard to enter an 11 digit ID. When the mini keyboard is connected, the left
becomes Change. After entering the ID, press under Ok to confirm the entry and
to return to the previous screen with the ID entered.
Selecting a Group ID
When programming a new PublicGroup, press under Change to select a PublicGroup ID from
1-50. IDs already in use on your radio will be preceded by an “x”.
Entering a Home Group Number (Contacts Only)
If a Home Group is selected for your radio, then it will return to that Group after 30 seconds of
inactivity. This ensures that any transmissions on this channel are not missed.
1. Scroll to select the Home Group Number and press under Change. The Home Group
screen appears.
NOTE: A next to a selection indicates the present selection.
2. Scroll to select the desired entry. Press under Select to select the new item. The dis-
play returns to the previous screen with the new Home Group Number entered.
Cancel
On other radio
press Home 3
times then PTT
Home Group
Office
Select Back
Security
None
9