Mocomtech CDM-570 - Manual (Page 334)

CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
different routes per screen. To allow editing on any of the 256
entries that can be defined, the user can select a base
address to control which 8 routes are displayed. For
example, if the user wants to edit Routes 32-40, then a Base
value of 32 should be defined.
Delete Route D Route Name to delete.
Displays all of the routes that are currently defined in the
system. This will include automatically generated routes that
are provided to simplify provisioning of the system. The
information displayed is: Route Name, DestIP/SnetBits, Next
Hop, HDLC, and Flags. Display P
Enter to enable Header Compression, Payload Compression
or 3xDES Encryption on a Per Route basis. PerRoute E
Read only status of Downlink Multicast (Enabled or
Disabled). This feature is enabled or disabled on the
Administrator Feature page. Downlink Mcast Read
Only
This option allows a user to save the current configuration to
permanent storage. This configuration will be restored on
each successive power cycle. Save Parameters S
This option allows a user to exit the current menu and return
to its parent menu. Exit X
Selecting Per Route will display the following menu:
Header Compression, Payload Compression or 3xDES Encryption can be configured on a
per Route basis by selecting the route number.
17–34