Marantz SR6300 - Manual (Page 12)

7
ENGLISH
¤0 EXIT button
(when AMP mode is selected)
Used to exit SETUP MAIN MENU or On Screen Display.
¤1 TEST button
(when AMP mode is selected)
Used to enter the test tone menu.
¤2 MENU/OSD button
(when AMP mode is selected)
When this button is pressed, the current setting are displayed on the
TV monitor.
¤3 VOLUME / buttons
Used to adjust the volume on receivers and other components
equipped with volume control.
¤4 P.SCAN (preset scan) button
(when TUNER mode is selected)
Used to start preset scan when SR6300 is selected TUNER mode.
¤5 MUTE button
Muting button of the SR6300. Press this button decrease the sound
temporarily . Press this button again to return to the previous sound.
When this button is pressed, “MUTE” indicator lights up.
¤6 MEMO button
Memory enable button for various preset functions.
¤7 NIGHT button
(when AMP mode is selected)
Pressing this button prevents the Dolby Digital signal from playback at
a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum.
Thus, it eliminates the occurrence of an abruptly loud voice at night.
However, the function is valid only for the case when the Dolby Digital
signal is entered into OPTICAL or COAXIAL and data to compress the
voice exists in the signal to be played back.
When this button is pressed, “NIGHT” indicator lights up.
¤8 PTY button
(when TUNER mode is selected)
Used to display the programme type information of the current station.
The RDS system categorizes programmes according to their genre
into different programme type (PTY) groups.
Note:
• This button is unavailable for SR6300.
¤9 F.DIR/SEAR button
(when TUNER mode is selected)
Used to select the mode of frequency direct input.
‹0 DISP./RDS button
(when TUNER mode is selected)
Selects display mode function in RDS (Radio Data System) by this
button.
Note:
• This button is unavailable for SR6300.
(when AMP mode is selected)
When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and
“DISPLAY OFF” indicator lights up.
Press this button again to turn the display ON again.
‹1 A/D button
This is used to switch between the analog and digital inputs.
‹2 SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can be operated the
same way as the button in unit.
‹3 7.1/6.1CH IN button
Press this button to select the output of an external multi channel decoder.
‹4 POWER ON OFF buttons
(when AMP mode is selected)
Press to switch the power of the SR6300 ON or OFF.
LCD (Liquid Crystal Display)
Information about currently selected functions and modes is displayed
on the LCD.
a Function Name indicator
Displays the name of the currently selected function (DVD, TV, etc.)
using up to 5 characters.
b LEARN indicator
Indicates when the remote controller is in the LEARN mode.
c USE indicator
For normal operation the USE indicator is displayed.
d MACRO indicator
Indicates when the remote controller is in the MACRO mode.
e Transmission indicator
Indicates when the remote controller is transmitting a signal.
f Low battery indicator
When this indicator appears, the batteries should be replace.
a b c d f e