Marantz SR6300 - Manual (Page 35)

30
ENGLISH ADJUSTING THE INTERVAL TIME OF MACRO
OPERATIONS TRANSMITTING
1.
Press and hold the T.MODE ⁄1 and SETUP button ⁄7 until the
SETUP is displayed on the LCD.
• SETUP is displayed for 3 seconds
2.
Confirm the display changes from SETUP to MCRxx.
(“xx” means the interval time of macro operations transmitting )
3.
Press the Cursor / button ⁄5 to change the interval time.
• The interval time can be changed from 0.5 to 5 seconds by 0.5
seconds step.
4.
Press and hold down the OK button ⁄5 until USE is displayed in
the display.
CLEARING MACRO PROGRAMS
The following procedure is used to erase macros you have
programmed into the remote controller’s memory.
1.
Press and hold the T.MODE ⁄1 and MENU button ¤2 until the
MACRO is displayed on the LCD.
• LEARN and MACRO is displayed blinking.
2.
Press and hold the CL button ., then the button for the function
, to be cleared (in this case DVD) for 3 seconds.
DVDCL will appear on LCD.
3.
Press the OK button ⁄5 to clear and return step
1
.
• To cancel the memory clearing operation, do not press OK
button ⁄5 and simply touch any other button.
4.
To return the USE mode, press and hold down the OK button ⁄5
until USE is displayed in the display.
(0.5 seconds)
(5 seconds)
(1.5 seconds)
(1 second)