Meco 6212S00T91 - Manual (Page 6)

6
Assembly Instructions
Step 1
Frame Identification
Identify parts and lay on floor as shown. Parts are named for their assembled position on the grill. The two Top U-
Frames are symmetrical so will work on the left or right.
The Left Legs (or Wheel Legs) are shorter, have a hole near the bottom for the wheel axle and have no end cap.
The Right Legs are longer and have a plastic Foot Cap on the end.
Insert the Left Legs into the ends of one Top U-Frame and the Right Legs into the ends of the other Top U-Frame. Note
that the notch at the top tapered end of all Legs will face the inside. Do NOT install any fasteners at this stage.
NOTE: Some illustrations may show parts that are not included in your grill
or are a different size. If assembly method is different it will be noted. If not,
proceed as instructed.
Right Leg
Notch to inside
Top U-Frame
Left Leg
Foot Cap
Open end
Notch to inside
The view below is shown with what will be the “FRONT” of the cart facing down.