Meco 6212S00T91 - Manual (Page 8)

8
Threaded Insert
1/4-20 x 1.1” Bolt
Tank Side
Brace
Left Leg
1/4-20 x .39”
Step 4
Tank Side Brace & Top Crossbrace Assembly
A. Place the Tank Side Brace inside the left Top U-Frame, with the open side facing inwards
and the threaded inserts at the bottom. Install a 1/4-20 x 1.1” bolt through the front of the
U-Frame then through the top corner of the Shroud and into the threaded insert inside the
Tank Side Brace. Next, install a 1/4-20 x .39” bolt through the hole in the end of the Tank
Side Brace and into the threaded insert in the inside face of the U-Frame.
B. Place a Crossbrace spanning the back two legs ori-
ented with the short flange at the top and facing inwards.
The left end will be between the Tank Side Brace and the
rear leg of the U-Frame so that the holes in all parts align.
Join parts together at the bottom hole with a 1/4-20 x
1.1” bolt through the back of the U-Frame then through
the Crossbrace and into the threaded insert inside the
Tank Side Brace.
Next, install a 1/4-20 x .39” bolt through the hole in the
end of the Tank Side Brace, through the Crossbrace and
into the threaded insert in the inside face of the U-Frame.
At the right end of the Crossbrace, install a 1/4-20 x .39”
bolt through the Crossbrace and into the threaded insert
in the inside face of the U-Frame.
Last, install a 1/4-20 x 1.1” bolt through the back of the
U-Frame then through the Crossbrace and fasten in place
with a 1/4-20 Nut.
1/4-20 x 1.1” Bolt
1/4-20 x .39”
1/4-20 Nut
1/4-20 x 1.1” Bolt
3 pcs
1/4-20 Nut
1 pc
1/4-20 x .39” Bolt
3 pcs
Back View