Meco 6212S00T91 - Manual (Page 7)

7
Step 2
Shroud to Leg Assembly
The next 2 steps are best performed on a smooth level surface (and/or with the help of a second person)
Place the shroud on Leg Frames as shown. Install a 5/32-30 x .39” bolt through each bottom corner of the shroud and
into the threaded insert in the inside face of the legs. Next, insert a 1/4-20 x 1.1” bolt through the front of the right
frame, through the shroud and fasten in place with a 1/4-20 nut.
Left Leg
Right Leg
5/32-30 x .39” Bolt
1/4-20 x 1.1” Bolt
1/4-20 Nut
Step 3
Front Crossbrace Assembly
Assemble one Crossbrace to the inside of the front legs as
shown with the short flange of the Crossbrace to the top.
Install 4) 1/4-20 x .39” bolts through the holes in the
Crossbrace and into the threaded inserts in the inside face
of the legs.
5/32-30 x .39” Bolt
2 pcs
1/4-20 x .39” Bolt
4 pcs
1/4-20 x 1.1” Bolt
1 pcs
1/4-20 Nut
1 pc
The views below are shown with what will be the “FRONT” of the cart facing down.