Maxtor NVR-2028 - Manual (Page 49)

47
COMM SETTING
WIRELESS
WAN SETTING
NET IP
NET DHCP
LEASED IP TABLE
IP POOL RANGE SET
COMM ID
RS232
MAIN PAGE
SET IP POOL RANGE
IP POOL RANGE SETTING
192.168. 1. 1 ― 192.168. 1.254
SET IP POOL RANGE
NET IP:
This option is used to configure the Ethernet communication settings. This is required for the purpose of
making a network connection. Please consult with a qualified MIS professional to configure it.
IP: XXX.YYY.ZZZ.SSS
MASK: 255.255.255.000
GATEWAY: XXX.YYY.ZZZ.TTT………………..(NAT local IP)
NET DHCP:
This option selects OFF or SERVER for the DHCP communication function.
OFF: Disables it.
SERVER: Enables it.
NOTE: The range of available IP to be leased by DHCP server is from XXX.YYY.ZZZ.1 to
XXX.YYY.ZZZ.254 except for NVR’s IP XXX.YYY.ZZZ.SSS.
LEASED IP TABLE:
Show DHCP leased IP table.
IP POOL RANGE:
You can set your DHCP IP address by changing only the last part of the four - part IP address given below.
The last part can be any number selected from a range between 1 and 254.
MAIN MENU
LAN CAMERA
RECORD / BANDWIDTH
CLOCK / TIMER / SEQ
ALARM
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
COMM SETTING
WIIRELESS : SET
WAN SETTING : SET
NET IP : SET
NET DHCP : SERVER
LEASED IP TABLE : ENTER
IP POOL RANGE : SET
COMM ID : 01
RS232 : ON
MAIN PAGE
SET NETWORK