Maxtor NVR-2028 - Manual (Page 73)

71
10.1.4 Change the PC SYSTEM SETTING
Follow the instructions below to reconfigure the System Setup and the Alarm Setup:
A. B.
Set the System Setup
1. When in the Wireless NVR Network Viewer Console, click the button to enter the PC
System Setup page.
2. Click the System Setup button to enter the System Setup page (see the sample screen in A
above).
3. Set the Authority Setting, Special Function, Sequence Setup, Pop Menu Setup and Snap File
Path functions of this page.
4. Click the OK tag to proceed.
Set the Alarm Setup
1. When in the Wireless NVR Network Viewer Console, click the button to enter the PC
System Setup page.
2. Click the Alarm Setup button to enter the Alarm Setup page (see the sample screen in B above).
3. Charge the Alarm Sound Setting if and as necessary.
4. Charge the Alarm Interval if and as necessary.
5. Click the OK tag to proceed.