Milwaukee 9072-20 - Manual (Page 3)

page 3
FUNCTIONAL DESCRIPTION
Double Insulated
Symbology
Volts Alternating Current/
Direct Current
Impacts per Minute
Under Load (IPM)
Amperes
Canadian
Standards Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Mexican Approvals
Marking
1. Drive shank
2. Forward/reverse switch
(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
3. Trigger
(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
Rocker switch (Cat. No. 9070-20, 9071-20, 9075-20)
4. Speed control dial
(Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
5. Quik-Lok® cord (Cat. No. 9072-20, 9072-22, 9092-20, 9096-20)
6. Quick change chuck (Cat. No. 9092-20, 9096-20)
7. Tool hanger (Cat. No. 9092-20, 9096-20)
8. Tool hanger ring (Cat. No. 9092-20, 9096-20)
1
4
3
2
Cat. No. 9072-20
9072-22
5
Impacts Per
Minute
2600
2600
1000-2600
1000-2600
2500
1000-2600
1000-2600
Cat.
No.
9070-20
9071-20
9072-20
9072-22
9075-20
9092-20
9096-20
Average Torque
Output
300 ft-lbs.
300 ft-lbs.
100-300 ft-lbs.
100-300 ft-lbs.
380 ft-lbs.
100-315 ft-lbs.
100-315 ft-lbs.
Volts
120 AC/DC
120 AC/DC
120 AC Only
120 AC Only
120 AC/DC
120 AC Only
120 AC Only
Specifi cations
A
7
7
7
7
7
7
7
Drive
Shank
1/2"
1/2"
1/2"
1/2"
3/4"
7/16" Hex
5/8" Hex
No Load
RPM
1800
1800
600-1800
600-1800
1750
600-1800
600-1800
6
Cat. No. 9092-20
7
8
3
Cat. No. 9075-20
Cat. No.
9070-20
9072-20
9072-22
9092-20
9096-20
Quick Change Auger Bits
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Quick Change Chuck Capacities*
Selfeed Bits
2-9/16"
2-9/16"
2-9/16"
2-9/16"
2-9/16"
* Only for use with the 7/16" or 5/8" Hex Quick Change chuck, stan-
dard equiptment on the 9092-20 (7/16") and 9096-20 (5/8"), optional
accessory (Cat. No. 48-66-0061) on other models.