IBM 1483DSV - Manual (Page 77)

4-12 701344-003
Operating Procedures
If you select the PRINT TRIM option, the screen is displayed with a box around the
printable area or the last print area defined with this option. To change the size of the trim
area, follow these steps:
1) Press the CrSel key to move the cursor to the upper left (or lower right) corner of the
area you want to define.
2) Press the arrow keys to move the cursor and the box corner where you want them.
The box corner moves with the cursor.
Note: The new upper left and lower right corner row/column settings are displayed in
the Trimmed Print Corners field of the Online Printer menu as described on
Page 3-34.
You can select a location on the printed page for the trim area output by specifying a
Print Position option on the Online Printer menu (Figure 3-14 on Page 3- 31).
Press F14 if you want to set paper control or session control options. The menu shown in
Figure 4-3, below, is displayed.
Use the arrow keys to select Paper Control or Session Control.
Paper Control
The paper control options let you send a line feed or form feed command to the printer.
To send a command, highlight Line Feed or Form Feed and press the Enter key.
Figure 4-3. Paper Control Options Menu
Printer/Session Screen Menu Screen
Use Arrow Keys to select
Use ENTER Key to execute
RESET Key Exits
Paper Control Session Control
Line Feed
Form Feed