Integra DHC-9.9 - Manual (Page 49)

49
First Time Setup
—Continued
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT, set the “Monitor Out” setting to
“Analog” so that the onscreen setup menus are displayed
and composite video and S-Video sources are upcon-
verted and output by the COMPONENT VIDEO MON-
ITOR OUT 1 or 2.
If you connect your TV to the HDMI OUT MAIN or
HDMI OUT SUB, set the “Monitor Out” setting to
“HDMI Main” or “HDMI Sub”, respectively, so that the
onscreen setup menus are displayed and composite
video, S-Video, and component video sources are
upconverted and output by the HDMI OUT MAIN or
HDMI OUT SUB.
You can specify the output resolution for the HDMI out-
puts and COMPONENT VIDEO MONITOR OUT and
have the AV controller upconvert the picture resolution
as necessary to match the resolution supported by your
TV.
Monitor Out Setup
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
+
-
On Standby
TV
Input
TV CH
TV VOL
--/--- 10 11 12
D.TUN
+10 0 Clear
1 2 3
4 5 6
7 8 9
Input Selector
VCR/DVR CBL/SAT DVD
Tape Tuner CD
Phono
Game/TV
Macro
1 2 3
VCR DVD
CDR/MD
CD Zone 2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver TV Dock Cable
VOL
CH
Disc
Album
+
-
Enter
Top Men u Men
u
Display Muting
Exi t Gu ide
Prev
CH Ret urn Setu
p
Audio Repeat Play Mode
Listening Mode
Playlist Random Rec
Direct
Stereo
THX All ST
Subtitle
Surround
SAT
Zone 3
AUX 1 AUX 2
2, 3 2–6
1
1, 7
Receiver
Setu
p
2 Use the Up and Down [ ]/[ ] but-
tons to select “1. Input/Output
Assign”, and then press [Enter].
The “Input/Output Assign” menu
appears.
3 Use the Up and Down [ ]/[ ] but-
tons to select “1. Monitor Out”,
and then press [Enter].
The “Monitor Out” menu appears.
4 Use the Up and Down [ ]/[ ] but-
tons to select “Monitor Out”, and
use the Left and Right [
]/[ ]
buttons to select:
Analog:
Select this if your TV is connected
to a video output other than the
HDMI OUT MAIN or HDMI OUT
SUB.
HDMI Main:
Select this if your TV is connected
to the HDMI OUT MAIN.
HDMI Sub:
Select this if your TV is connected
to the HDMI OUT SUB.
Note:
When “HDMI Main” or “HDMI Sub”
is selected, the onscreen setup menus
are output by only the HDMI outputs.
If you’re not using the HDMI outputs
and select “HDMI Main” or “HDMI
Sub” by mistake and the menus dis-
appear, press the AV controller’s
[HDMI Out] button so that “Monitor
Out: Analog” appears on the display.
Enter
Enter
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
Enter
Enter
1–1. Monitor Out
Monitor Out
Resolution
Brightness
Contrast
Hue
Saturation
Analog
Through
0
0
0
0
MOVE VALUE RETURN RETURN EXIT SETUP
Enter
Enter