Icom IC-M90 - Manual (Page 14)

Push for 1 sec.
U.S.A. channels
International channels Canadian channels
8
4
BASIC OPERATION
D U.S.A., International and Canadian channels
The IC-M90 has 57 U.S.A., 57 International and 61 Canadian
channels. You must select the proper channels for the oper-
ating area.
q Push [CH/WX• U/I/C/L ] to select the regular channel.
• If the weather channel appears, push [CH/WX• U/I/C/L ] again.
w Push [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
e To change the channel group, push [CH/WX• U/I/C/L ] for 1
sec.
• U.S.A., International and Canadian channels can be selected in
sequence. Depending on the setting, LAND channel can be se-
lected. See the “LAND CHANNEL OPERATION” on p. 15 for de-
tails.
D Weather channels
The IC-M90 has 10 weather channels. They are used for
monitoring NOAA (National Oceanographic and Atmospheric
Administration) broadcasts (reception of weather channels
possible in U.S.A. only).
q Push [CH/WX• U/I/C/L ] to select the weather channel group.
w Push [Y]/[Z] to select a weather channel.
e Push [CH/WX•
U/I/C/L ] to return to the condition before se-
lecting the weather channel group.
✔ CONVENIENT!
The IC-M90 can detect a weather alert tone on the
selected weather channel while in another channel (when the
power save function is turned ON) or during scanning. See
the “SET mode items” on p. 17 for details.
Push