IBM E74M - Manual (Page 4)

A1
Introduction
Thank you for purchasing a high resolution monitor. It will give you
high resolution performance and convenient reliable operation in a
variety of video operating modes.
Features
The monitor is a 17 inches (15.9 inches viewable ) intelligent,
microprocessor based monitor compatible with most analog RGB
(Red, Green, Blue) display standards, including IBM PC
® , PS/2 ® ,
Centris ® , Quadra ® .
The monitor provides crisp text and vivid color graphics with
VGA, SVGA, XGA, and VESA Ergo modes (non-interlaced). The
monitor's wide compatibility makes it possible to upgrade video
cards or software without purchasing a new monitor.
Digitally controlled auto-scanning is done with the micro-
processor for horizontal scan frequencies between 30 and
70kHz, and vertical scan frequencies between 50 and 160Hz.
The microprocessor-based intelligence allows the monitor to
operate in each frequency mode with the precision of a fixed
frequency monitor.
The microprocessor-based digital controls allow you to adjust
conveniently a variety of image controls by using the OSD (On
Screen Display).
The monitor has 20 memory locations for display modes, 10 of
which are factory preset to popular video modes.
This monitor is capable of producing a maximum horizontal
resolution of 1280 dots and a maximum vertical resolution of
1024 lines. It is well suited for CAD work and sophisticated
windowing environments.
For greater user health and safety, this monitor complies with the
stringent Swedish
MPR II requirements for low radiation
emissions.
For low cost of monitor operation, this monitor is certified as
meeting the EPA Energy Star requirements, and utilizes the
VESA Display Power Management Signalling (DPMS) protocol
for power saving during non-use periods.