IOGear GBS301 - Manual (Page 15)

13
13
Use your Bluetooth software to search for Bluetooth devices in range. Once the Bluetooth
serial adapter is detected, pair to it. If prompted for a PIN code, enter “1234” (without the
quotes).
Once paired, establish a connection using the Bluetooth serial port profile (SPP).
If you’re not sure how to do this, please consult the documentation for your Bluetooth
hardware/software.
Once you have established a Bluetooth serial port connection, the blue LED will turn
off. Below is an example, using the Widcomm software version 3.0.x
5
Pair and Connect
Instructions
Basic Configuration