IOGear GBS301 - Manual (Page 25)

Configuring Serial Adapter
23
Advanced Configuration
Set the Baud rate on the Serial adapter to 9600 (see table 1 on page 9)
1
Set baud rate
Plug the Bluetooth serial adapter to an available serial port on your computer (Do NOT
power on the serial adapter yet).
2
Plug in
Open HyperTerminal (Go to Start Run, and type “hypertrm”) and enter any
desired name for your hyperterminal session. If the program does not launch, you may
have to install it from your Windows installation disc.
3
Open Hyper Terminal