Intel V09 - Manual (Page 2)

BIOS Settings Dictionary – Alphabetical
V09 – March 2008
0 – 9
BIOS Setting Appears on BIOS
Screen… Options Description / Purpose
+1.5Vin Advanced >
Hardware
Monitoring No changeable
options Displays voltage level of the +1.5V in supply
+12Vin
or
12V Voltage
Advanced >
Hardware
Monitoring No changeable
options Displays voltage level of the +12V in supply
+3.3Vin Advanced >
Hardware
Monitoring No changeable
options Displays voltage level of the +3.3V in supply
+5Vin
or
5V Voltage
Advanced >
Hardware
Monitoring No changeable
options Displays voltage level of the +5V in supply
1394
This BIOS setting is
present only on Intel®
Desktop Boards that
include IEEE 1394.
Advanced >
Peripheral
Configuration • Enabled
• Disabled Disables or enables IEEE 1394 support
1 st ATAPI CD-ROM
Drive
This boot device
submenu is present
only if at least one
boot device of this
type is installed. This
list will display
up to four ATAPI CD-
ROM drives, the
maximum number of
ATAPI CD-ROM
drives supported by
the BIOS.
Boot > ATAPI CD-
ROM Drives Dependent on
installed ATAPI
CD-ROM drives Specifies the boot sequence from the available ATAPI CD-
ROM drives. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
1 st Boot Device Boot > Boot
Device Priority • Removable
Device
• Hard Drive
• ATAPI CD-ROM
• Network
• Disabled Specifies the boot sequence from the available devices.
To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
The operating system assigns a drive letter