Left right, B. wifli™ car charger, C. wifli™ app (iphone & ipod touch only) – iSimple IS713 User Manual

Page 6: Wifli

Advertising
background image

3

B. WiFli™ Car Charger

To increase play time of your WiFli™, connect it to your
vehicle’s lighter port using the WiFli™ car charger. When
connected, the WiFli™ car charger also charges the con-
nected iPod or iPhone.

Caution!

The WiFli™ car charger utilizes a mini USB connection to provide battery charging to an iPod
or iPhone docked to the WiFli™. Because the car charger has only been tested for use with
the WiFli™, iSimple

®

recommends it not be used to charge other portable media devices.

iSimple claims no responsibility for damages resulting from use of the car charger with de-
vices other than the WiFli™
.

C. WiFli™ App

(iPhone & iPod touch only)

To use the WiFli™ with an iPod touch or iPhone, you will first need to download and install
the free WiFli™ App from the iTunes App Store.

1. Connect the WiFli™ node to the docking port on your iPod touch or iPhone; a message
should appear indicating that the WiFli™ App is not yet installed.
2. You will then see a massage prompting you to install the WiFli™ app; click “YES”.
3. The device will take you to the WiFli™ app page at the iTunes App Store.
4. Download and install the WiFli™ app for FREE.

NOTE:
An internet connection is required to access the iTunes App Store. Check with your wire-
less carrier regarding any data usage fees.

No application is required for the iPod classic, iPod nano or other iPod models featur-
ing a click wheel.

5. Operation
A. Operating from Device
1. iPhone / iPod touch

a. Connect the WiFli™ node into the docking port on the bottom of the iPhone / iPod touch
b. Click on the WiFli™ application to run it (this requires the installation of the WiFli™ app –
see section 4 for installation details).
c. Tune your radio to the frequency displayed by the WiFli™ app.

Note:
When running the WiFli™ app you may see a message that reads “Waiting for WiFli™.”
If this occurs, please disconnect, then reconnect the WiFli™ to the device and wait 10
seconds. The message will automatically disappear when the WiFli™ is detected.

+

MENU

WiFli

WiFli

MENU

Left

Right

miniUSB

miniUSB

+

MENU

WiFli

WiFli

MEN

U

Left

Right

miniUSB

miniUSB

Advertising