IOGear GCS1742 - Manual (Page 10)

10
3. USB Port
Connect one USB peripheral (printer, scanner,
etc.) here to share with your computer in your
KVM setup. KVM:
• Lights DIM ORANGE to indicate that the
computer attached to the corresponding port is
up and running (On Line).
• Changes to BRIGHT ORANGE to indicate that
the computer attached to its corresponding port
is the one that has the KVM focus (Selected).
• Flashes to indicate that the computer attached to
its corresponding port is being accessed under
Auto Scan mode.
USB:
• Lights DIM GREEN to indicate that there is a USB
cable connection to the computer. Does not light if
there is no USB connection to the computer (see
the installation diagram on p. 10).
• Changes to BRIGHT GREEN to indicate that the
computer attached to its corresponding port is the
one that has access to the USB peripherals.
Introduction